The Complete Guide to Pressure Cleaning Costs in Melbourne
@knoxyjvp567
Pressure cleaning is one of the most effective ways to restore driveways, patios, roofs, decks and exterior walls across Melbourne. Whether you are preparing a property for sale, removing slippery moss and mould, or simply refreshing tired surfaces, knowing what to expect on price helps you budget sensibly and avoid overpaying. This guide explains typical pricing in 2026, the factors that influence quotes, and how to choose a reliable provider.
Please note: the prices below are general estimates based on typical Melbourne market rates. Actual quotes vary by provider, property and season, so always request a written quote before work begins.
Average Pressure Cleaning Costs in Melbourne
Most Melbourne pressure cleaning businesses price either per square metre or as a flat rate for a specific job. Minimum call-out fees commonly apply, often in the range of $150 to $250, particularly for small jobs or sites far from the provider's base.
Typical Price Ranges by Surface
- Concrete driveways: roughly $5 to $12 per square metre, or about $200 to $500 for a standard single or double driveway.
- Patios and paved outdoor areas: roughly $6 to $14 per square metre, depending on paver type and condition.
- Timber decks: roughly $7 to $15 per square metre, often higher if sealing or oiling is included.
- Roof cleaning (tiled or Colorbond): roughly $400 to $1,200 or more, depending on roof size, pitch and the level of moss or lichen.
- House exterior walls: roughly $300 to $900 for a typical single-storey home, with double-storey homes costing more.
- Fences: roughly $5 to $10 per linear metre for standard timber or Colorbond fencing.
- Pool surrounds: roughly $200 to $500 depending on size and surface type.
Key Factors That Affect Your Quote
Size and Accessibility
Larger areas generally cost more in total, but the per-square-metre rate often drops as the job size increases. Access matters too. Steep blocks, tight side access, multi-storey buildings and areas requiring scaffolding or specialist safety equipment add time and risk, which is reflected in the price.
Surface Type and Condition
Heavily stained surfaces take longer to clean. Oil stains on driveways, deep-set moss on roofs, graffiti, rust marks and years of built-up grime may require pre-treatment with detergents or specialist products. Delicate surfaces such as sandstone, old render, soft bricks and some timber need lower pressure or softwash methods, which can increase labour time.
Cleaning Method
Standard high-pressure cleaning suits hard surfaces like concrete. Softwash techniques use low pressure combined with biodegradable cleaning solutions, and they are the preferred approach for roofs, painted walls and weathered render. Softwash can cost slightly more due to chemicals and additional care, but it reduces the risk of damage.

Location Within Melbourne
Travel distance can influence pricing. Providers in inner suburbs may charge more for parking and access challenges, while outer-suburban and peri-urban jobs may include travel surcharges. Many local operators service broad areas, including the eastern, south-eastern, northern and western suburbs, so it pays to compare several quotes.
Water Access and Environmental Requirements
Pressure cleaners need a reliable water supply. Most use the property's outdoor tap, but some bring their own water tanks, which may add to the cost. In Melbourne, wastewater must not be allowed to enter stormwater drains carrying detergents, oils or contaminants. Reputable providers use wastewater capture, filtration or diversion to garden or sewer connections where appropriate, and this compliance can add modestly to the price. Local councils and the EPA Victoria provide guidance on keeping pollutants out of stormwater systems.
Additional Services That Add to the Cost
Many providers offer add-ons that can raise the total but deliver longer-lasting results:
- Sealing: applying a sealer to concrete, pavers or stone protects against stains and slows regrowth. Expect roughly $3 to $10 per square metre extra.
- Anti-mould or anti-fungal treatments: useful in Melbourne's shaded, damp areas and often a modest additional charge.
- Gutter cleaning: commonly bundled with roof or exterior wall cleaning at a discounted rate.
- Weed removal and joint re-sanding: for paved areas, re-sanding joints after cleaning helps lock pavers in place.
- Graffiti or rust removal: specialist treatments are typically charged separately.
DIY vs Professional Pressure Cleaning
Hiring a pressure washer from a hire shop typically costs $60 to $120 per day, with consumer machines available for several hundred dollars. DIY can make sense for small, simple jobs such as a short path or a few outdoor chairs. However, there are drawbacks to consider:
Incorrect pressure or nozzle selection can etch concrete, strip paint, damage timber and force water behind cladding or under roof tiles. Cleaning roofs and elevated areas also carries a real fall risk. Professionals bring commercial-grade equipment, surface cleaners that provide an even finish without striping, appropriate chemicals and insurance. For roofs, multi-storey homes and valuable surfaces, professional service is usually the safer and more cost-effective choice.
How to Get an Accurate Quote
To receive a reliable price, provide as much detail as possible. Measurements, photographs of the areas to be cleaned and information about the surface type and stains help providers quote accurately. Many Melbourne companies now offer online photo-based quotes, though on-site inspections are best for roofs and larger properties.
When comparing quotes, check that each one clearly states:
- The exact areas and surfaces included in the job.
- The cleaning method and products to be used.
- Whether sealing, treatments or add-ons are included.
- How wastewater will be managed.
- Public liability insurance details and any relevant licences or certifications.
- Payment terms and any guarantee on the work.
Tips for Saving Money Without Compromising Quality
Bundling multiple surfaces into one visit, such as the driveway, patio, fences and walls, usually lowers the overall cost because the provider saves on set-up and travel. Booking during quieter periods, such as late winter, can sometimes yield better rates than the busy spring period when homeowners prepare for warmer weather and property sales. Clearing furniture, pot plants and vehicles ahead of time also reduces labour time and can prevent extra charges.

Regular maintenance also saves money in the long run. Melbourne's cool, damp conditions encourage moss, algae and mould growth, particularly on south-facing and shaded surfaces. Cleaning driveways and paths every one to two years, and roofs every three to five years or as needed, prevents heavy build-up that is costlier to remove.
Warning Signs of a Poor Quote or Provider
Be cautious of quotes that are dramatically lower than others, as they may indicate rushed work, a lack of insurance or non-compliant wastewater practices. Be wary of providers who insist on cash-only payment, refuse to provide a written quote, or recommend high pressure for roof tiles or delicate surfaces. Reading recent customer reviews, asking for before-and-after photos of similar jobs and confirming insurance coverage are simple https://melbournepressurecleaningpros.com.au/tennis-court-cleaning/ steps that protect your investment.

Is Pressure Cleaning Worth the Cost?
Professional pressure cleaning is generally a cost-effective way to improve kerb appeal, reduce slip hazards and extend the life of exterior surfaces. Removing moss and lichen from roofs helps prevent premature deterioration of tiles and paint, while clean driveways and paths make a noticeable difference when selling or renting a property. By understanding typical Melbourne pricing in 2026, comparing detailed written quotes and choosing an insured, experienced provider, you can achieve excellent results at a fair price.
Melbourne Pressure Cleaning Pros
(03) 8007 3103